Water depth: 0 to 1,000 cm
Water depth: 2 mm
Water depth: +/- 0.5% of full scale @ 20 °C
NOTE: Depth measurement accuracy assumes no abrupt temperature variations
Electrical conductivity: ±0.01 dS/m or ±10% (whichever is greater)
NOTE: The EC is corrected to a standard temperature @ 25 °C
Temperature: ±1 °C
0 to 50 °C (Pressure transducer cannot be allowed to freeze while submersed)
3.6 – 15 VDC, 0.03 mA quiescent, 0.5 mA during 300 ms measurement
9 cm (l) x 3.4 cm (w)
300 ms (milliseconds)
Serial TTL, 3.6 Volts Levels or SDI-12
3.5 mm (stereo) plug or stripped & tinned lead wires (3)
10 m standard; custom lengths available upon request
|Data logger compatibility (not exclusive)||
METER ZL6,EM50/60 Series, ProCheck, Campbell Scientific
ECH2O Utility (rev 1.64+), DataTrac3 (rev 3.4+)
METER HYDROS 21 – Conductivity, Temperature, Depth Sensor
The case of too many sensors
The problem with most water depth, temperature, and electrical conductivity (EC) sensors is that their cost is prohibitively high. Not only that, but the measurement often requires you to purchase an extra sensor to make a barometric pressure reading to correct for atmospheric pressure. You need a low-cost instrument that’s equipped with every sensor necessary for things like tracking changes in solute movement, measuring groundwater recharge, and studying surface water hydrology. You need the HYDROS 21.
Just the right mix of measurements
A compact 3.4 cm diameter sensor that fits into tight spaces, the HYDROS 21 is a low-cost, durable, and easy-to-use tool for monitoring EC, temperature, and depth in both groundwater and surface water. More importantly, it’s an all-in-one instrument. When used with the ZL6 data logger, you won’t require an additional sensor for measuring—and referencing—barometric pressure. With a range of 0 to 120 dS/m and a measuring depth of 10 m, the sensor makes accurate depth and EC measurements for a broad range of applications.
Level 1 simplicity (on a scale of 1-10)
One of the qualities that makes the HYDROS 21 so easy to use is its fast plug-and-play compatibility with the ZL6 data logger (also compatible with Campbell Scientific data loggers). Plus, with the ZL6, you can monitor and remotely access cloud data wirelessly from any internet-connected computer or device in near-real time.
Same measurement specs for less
Trying to measure water level, temperature, and EC typically requires an expensive sensor with integrated telemetry. Unlike competitor sensors, all of the HYDROS 21’s data management happens in an external data logger, so the cost of each individual sensor is lower. Now, instead of having to rely on a single point measurement, you can take readings in several different locations without exceeding your budget.
A high-level water sensor in every sense
While engineering the HYDROS 21, we wanted to design a water level sensor that was not only highly accurate but also provided a high degree of value. Because of its low-complexity, low-maintenance, and low-cost design, you can be assured you’re getting an instrument that will save you time, hassle, and money.